configure Huawei SmartAX MT880 Modem / SmartAx MT882 ADSL Modem

hi ,i  am ajay.you are welcome on this blog
Today we will configure SmartAx MT880 MODEM/ SmartAxMT882 ADSL Modem step by step

FIRST STEP:

1. connect all wire of modem.and start your computer
2. open internet browser
3. type 192.168.1.1 in address bar
4. note: if 192.168.1.1 is not working, remember every modem have its RST  button.then you have to restore the modem to factory setting.for restore you have to press RST button with  needle or pen for 30 seconds.
5. the next step is enter user name and password

STEP TWO:

1. enter user name:admin
2. enter password:admin
3. next screen will apear.click on WAN

STEP THREE: 

your setting must be as below

1. PVC No.: PVC0
2. Wan type: PPP
3. Connection Type : PPPoE
4. VPI / VCI : 0/35
5. Default Route : Enabled
6. Username: enter username which is given by ISP
7. Password: enter PASSWORD which is given by ISP
8. Use DNS : Enabled
9. Click on Apply./SUBMIT

ENJOY FEEL FREE TO CONTACT ME...THANK YOU FOR VISTING